Klüberpaste UH1 84-201
White lubricating and assembly paste
Description
Klüberpaste UH1 84-201 is a white
lubricating and assembly paste
authorized in accordance with
USDA-H1. It contains a fully synthetic
base oil and a thickener
consisting of a mixture of organic
and inorganic solid lubricants.
The raw materials contain no heavy
metals or sulphur.
Klüberpaste UH1 84-201 is universally
applicable as an assembly
paste and particularly suitable for
lubrication points operating in a
humid environment. The paste is
very resistant to water, shows good
anticorrosion behaviour and is
compatible with high-alloy steels.
Application
Klüberpaste UH1 84-201 is generally
suitable for all friction points in the
food processing and pharmaceutical
industries.
As an assembly paste
? for transition and clearance fits
As a screw compound
? for high-alloy steels to optimize
the tightening torque and facilitate
disassembly after a long service
life
As a lubricating and assembly paste
? for low-speed plain bearings and
axially guided plain bearings
? for guide rails, hinges, rollers,
cams, etc.
Application notes
Before applying Klüberpaste UH1
84-201 it is important to clean and
Product Information 5.194 e Edition 03.95
210.I.95
degrease the contact surfaces
thoroughly. A thin layer of the paste
is then applied by brush, leather rag
or synthetic sponge. It spreads
easily over the entire surface and
thus prevents over-lubrication. If
Klüberpaste UH1 84-201 is used on
small gears ensure that the tooth
flanks are covered evenly. We
recommend carrying out a compatibility
test before applying the paste
to plastic materials.
Storage
The storage period is approx.
2 years if the product is stored in
the original closed container is a
dry place.
Pack size
25 x 50 g tubes
500 g cartridge
600 g can
25 kg drum
Klüberpaste UH1 84-201
● Metal-free
● High-performance lubricating
and assembly paste
authorized in acc. with
USDA-H1
● Excellent low-temperature
behaviour
● Good pressure absorption
capacity
● Good corrosion protection
● Neutral towards alloyed steel
● Water hazard category 1
white
-45 to 120
1.13
200
> 240
310 ? 340
> 3000
1
Colour
Service temperature range, °C, approx.
Density, DIN 51 757, at 20 °C, (g/cm3), approx.
Base oil viscosity, DIN 51 561, at 40 °C, (mm2/s)
Drop point, DIN ISO 2176, °C
Worked penetration at 25 °C, DIN ISO 2137
(ASTM D 271); 0.1 mm
Four-ball welding test, DIN 51 350 Pt 4, N
Corrosion behaviour, SKF Emcor test, DIN 51 802,
1 week, distilled water, rating
Product data
Klüberpaste UH1 84-201
Safety Data Sheet
Klüber Lubrication München KG
Postfach 701047, D-81310 München
Tel. (089) 7876-0, Telex 5 23 131, Telefax (089) 7876333
Publisher and Copyright:
Klüber Lubrication München KG
Reprints, total or in part, are permitted if source
is indicated and voucher copy is forwarded.
The data in this brochure is based on our general experience and knowledge at the time of printing and is intended to give information of possible applications to a
reader with technical experience without, however, constituting an assurance of properties for specific cases. We recommend contacting our Technical Consulting
Staff for information regarding specific applications. If required and possible we will be pleased to provide a sample for testing.
Klüber Lubrication, a member of the Freudenberg Group
1.1 Product name: Klüberpaste UH 1 84-201
Code-No. : 005 113
Klüber Lubrication München KG, Geisenhausenerstr. 7
D-81379 Munich; Tel. (089) 7876-0, Fax (089) 7876-333
Emergency no.: (089) 7876-0
2. Composition/information on ingredients
Chemical characterization: Synthetic hydrocarbon oil, PTFE, solid
lubricants
Additional information: No hazardous ingredients
3. Hazards identification
No particular hazards known.
4. First aid measures
Contact with skin: Wash off with soap and plenty of water.
Contact with eyes: Rinse with plenty of water.
Ingestion: Do not induce vomiting. Obtain medical attention.
Advice to doctor: Treat symptomatically.
5. Fire-fighting measures
Suitable extinguishing media: Water spray, foam, dry powder, CO2
Unsuitable extinguishing media: High volume water jet
Special hazards: In case of fire can be released: Carbon monoxide,
hydrocarbons, traces of fluorinated products
Special protecting equipment: Standard procedure for chemical fires.
Additional information: Cool closed containers with water mist. Do not
breathe fumes.
6. Accidental release measures
Personal precautions: Not required.
Environmental precautions: Do not flush into surface water or sanitary
sewer system.
Methods for cleaning up/taking up: Use mechanical handling
equipment. Dispose of absorbed material in acc. with the regulations.
Additional information: None
7. Handling and storage
Safe handling: No special handling advice required.
Protection against fire and explosion: No special precautions required.
Requirements on storage rooms and vessels: ??
Incompatible materials: Incompatible with oxidizing agents.
Further information: Store at room temperature in the original container.
8. Exposure controls / personal protection
Additional advice on system design: Not applicable
Ingredients and specific control parameters: None
Personal protective equipment
Respiratory/hand/eye/body protection: No special protective equipment
required.
General protection and hygiene measures: Clean skin thoroughly after
work; apply skin cream. Keep away from tabacco products.
9. Physical and chemical properties
Form paste
Colour white
Odour none
Drop point > 240 °C
Flash point (base oil) > 200 °C
Flammability not applicable
Ignition temperature not applicable
Autoflammability not applicable
Lower explosion limit not applicable
Upper explosion limit not applicable
Vapour pressure ? first not applicable
Density (20 °C) ≈ 1.13 g/cm3
Water solubility insoluble
pH value not applicable
Kinematic viscosity not applicable
Further information None
10. Stability and reactivity
Conditions to avoid: None
Materials to avoid: Strong oxidizing agents
Hazardous decomposition products: > 300 °C traces of fluorinated
products.
Additional information: None
11. Toxicological information
The toxicological data has been taken from products of similar
composition.
Acute toxicity: LD50 oral/rat = > 2g/kg (literature data)
Chronic toxicity: None
Human experience: Health injuries are not known or expected under
normal use.
12. Ecological information
Information on elimination: Product is insoluble in water. May be
separated out mechanically in purification plants.
Behaviour in environmental compartments: Ecological injuries are not
known or expected under normal use.
Ecotoxic effects: The product has not been tested. Aquatic toxicity is
unlikely due to low solubility.
Additional information: Should not be released into the environment.
13. Advice on disposal
Can be incinerated when in compliance with local, state and federal
regulations. Contains halogene.
Dispose of contaminated packaging and recommended cleaning:
Offer rinsed packaging material to local recycling facilities.
14. Transport information
GGVS / GGVE: not applicable ADN / ADNR: not applicable
IMDG / GGVsee: not applicable ICAO / IATA: not applicable
Further information: Not classified as dangerous in the meaning of
transport regulations.
15. Regulatory information
Labelling: The product does not require a hazard warning label.
16. Other information
USDA H 1 authorization |
